Pluralsight_Creating_and_Joining_Solid_Geometry_with_Simple_Tools_in_Rhino

در این آموزش تصویری با ایجاد هندسه فضایی با ابزارهای ساده در Rhino  آشنا می شوید.
این دوره آموزشی محصول موسسه Pluralsight است.

سرفصل های دوره:

  • کار با Rhino
  • کار با ابزارها و ویژگی ها
  • نحوه مدل سازی در Rhino
  • کار با نرم افزارهای معماری
  • نحوه سه بعدی سازی تصاویر
  • نحوه متحرک سازی تصاویر
  • نحوه چک کردن برنامه
  • ساخت بدنه اصلی برنامه
  • اضافه کردن جزئیات به برنامه
  • نحوه رفع خطاها
  • کار با حلقه ها
  • نحوه حفاظت از برنامه
  • تست برنامه
  • افزایش امنیت
  • طراحی جزئیات بیشتر
  • نحوه تجزیه و تحلیل برنامه
  • ایجاد بخش اصلی Handle
  • تکمیل جزئیات Handle
  • نحوه انتخاب رمز عبور
  • بازسازی رمز
  • و…

عنوان دوره: Pluralsight Creating and Joining Solid Geometry with Simple Tools in Rhino
سطح: مقدماتی
مدت زمان: 5 ساعت و 40 دقیقه
نویسنده: Adam Fairless
توضیحات:

Pluralsight Creating and Joining Solid Geometry with Simple Tools in Rhino

Adam Fairless
5h 40m
Beginner


Throughout these lessons, we will explore techniques to create solid geometry from several of Rhino's basic modeling tools such as extrudes lofts, radii, and offset surfaces. Software required: Rhino 5

Introduction and Project Overview
1m 22s
Creating and Joining Solid Geometry with Simple Tools in Rhino
5h 38m
Blocking in the Beginning the Tool Box Tray
10m 20s
Using Simple Geometry
10m 58s
Ensuring All Surfaces Intersect Correctly
10m 40s
Checking for and Fixing Naked Edges
10m 42s
Building the Main Tool Box Body
10m 58s
Adding Further Details to the Main Tool Box
10m 23s
Finishing the Indents and Adding Ribs
11m 12s
Fixing Minor Errors and Removing Cut Outs
10m 24s
Adding Details That Will Allow the Locking Clasps to Clip Onto the Main Body
10m 35s
Finishing the Main Tool Box Body and Starting Work on the Lid
10m 11s
Duplicating a Locking Loop into the Upper Lid
10m 25s
Finishing the Cut out Area in the Lid
10m 16s
Starting the Locking Clasps
10m 27s
Further Work on the Locking Clasps
12m 26s
Finishing the Locking Clasps and Adding Protective Ribbing
9m 47s
Working on the Lid Hinge
10m 29s
Altering the Position of the Hinge
11m 0s
Drawing and Cutting Further Details
10m 13s
Creating Internal and Offset Surfaces
11m 28s
Adding Details to the Handle Area
11m 0s
Checking Solid Integrity with Analysis Tools
10m 15s
Taking Basic Tooling into Consideration
10m 22s
Building the First Elements of the Handle
10m 9s
Creating the Main Part of the Handle
10m 36s
Finishing the Handle Grip Details
10m 51s
Continuing Work on the Upper Lids
10m 41s
Accommodating the Clasp and Adding Surface Details
11m 29s
Starting Work on the Hinges to Hold on the Upper Lids
10m 33s
Using Simple Splits and Rebuilding Surfaces
10m 33s
Finishing the Hinges and Adding One Final Clasp
10m 38s
Rebuilding the Upper Lid Clasps
11m 3s
Demonstrating Rotating Parts and Functionality
7m 25s