Pluralsight_SOLIDWORKS_Sheet_Metal_-_Enclosure_Part_Design

در این آموزش تصویری با مدل سازی قطعات فلزی در SOLIDWORKS آشنا می شوید.
این دوره آموزشی محصول موسسه Pluralsight است.

سرفصل های دوره:

  • کار با نرم افزار SolidWorks
  • کار با ابزارهای سه بعدی
  • کار با ابزار edge
  • کار با ابزار miter flanges
  • کار با ابزار bolt holest
  • کار با ابزار ventand miter flanges
  • استفاده از طرح های سه بعدی
  • کار با SOLIDWORKS 2012
  • ویژگی های ورق های فلزی
  • ترکیب یک ورق فلزی با مدل مورد نظر
  • اضافه کردن فیلد به جدول
  • ساخت طرح های فانتزی
  • استفاده از اشکال هندسی
  • و…

عنوان دوره: Pluralsight SOLIDWORKS Sheet Metal – Enclosure Part Design
مدت زمان: 2 ساعت و 13 دقیقه
نویسنده: Chris Scarlett


توضیحات:

Pluralsight SOLIDWORKS Sheet Metal - Enclosure Part Design

Chris Scarlett
2h 13m

Throughout these lessons, we will be creating a sheet metal part for an electrical enclosure confined and driven by a design envelope along with various tools including the edge and miter flanges, bolt holes, a vent, and various other features. We will cover the creation of a portion of an electrical enclosure to house equipment for assembly line processing machines. You will also learn how to apply basic properties for your sheet metal part, a base flange, edge flange, miter flange, the hole wizard, and the vent fastener feature as well as various options and methods. Ultimately, a sheet metal part model is created and ready to be assembled with other sheet parts, components, and fasteners to create an electrical enclosure. Software required: SOLIDWORKS 2012 and up.

Introduction and Project Overview
1m 22s
Introduction and Project Overview
1m 22s
SolidWorks Sheet Metal - Enclosure Part Design
2h 11m
Introducing the Sheet Metal Part for an Electrical Enclosure
7m 49s
Exploring Our Design Envelope with the 3D Sketch Tool
6m 49s
Creating Our Design Envelope Using 3D Sketch
11m 33s
Continuing Our Design Envelope Using 3D Sketch
10m 51s
Creating Our First Sheet Metal Feature
8m 43s
Incorporating a Galvanized Sheet Metal Gauge Table into Our Model
9m 16s
Adding the Edge Flange Sheet Metal Feature
11m 27s
Adding a Miter Flange to the Right and Left Sides of Our Sheet Metal Part
9m 53s
Creating an Edge Flange for the Top and Back of Our Part
12m 3s
Adding More Sketch Entities for References
12m 1s
Applying Sketch Geometry from Our Design Envelope
11m 56s
Creating Our Sketch Geometry for the Vent
10m 22s
Creating a Fan Vent Using the Vent Fastening Feature
9m 1s