مطالب پیشنهادی از سراسر وب

آموزش گام به گام ساخت کوادکوپتر

دسته بندی ها: آموزش اینترنت اشیاء (IOT) ، آموزش میکروکنترلر ARM ، آموزش میکروکنترلر ای وی آر (AVR) ، آموزش رباتیک (Robotics) ، آموزش های یودمی (Udemy)

در این آموزش تصویری با ساخت کوادکوپتر به صورت گام به گام آشنا می شوید. این دوره هدایت هواپیمای بدون سرنشین را شبیه سازی می کند. هدایت این هواپیما با کنترل از راه دور انجام می گیرد، به همین خاطر کنترل چنین هواپیماهایی نیازمند دقت بالا در کنترل آن می باشد.

این دوره آموزشی محصول موسسه Udemy است.

سرفصل های دوره:

  • انتخاب اجزاء، قطعات و تجهیزات
  • معرفی drone
  • کار با LIPO Battery
  • استفاده از شارژر IMAX B6
  • کار با quadcopter
  • تست چرخش موتور
  • نحوه مونتاژ موتور
  • مونتاژ قاب - بخش اول
  • مونتاژ قاب - بخش دوم
  • نصب و راه اندازی بازوها
  • نحوه اتصال سیم به باتری
  • تکمیل کوادکوپتر
  • راه اندازی و کنترل پرواز - بخش اول
  • راه اندازی و کنترل پرواز - بخش دوم
  • دانلود OpenPilot GCS (ایستگاه کنترل زمینی)
  • کنترل پرواز و پیکربندی رادیو
  • و...

عنوان دوره: Udemy Drones: Step by step to build and fly a racing quadcopter مدت زمان: 7 ساعت نویسنده: Silvio A C Gollega Jrتوضیحات:

Learn to build and fly a racing quadcopter from scratch, with accessible cost components and equipment.
This course is about building and piloting drones. Directly and in a simply way, we will build together a complete quadcopter. I will help you to choose all the components and necessary equipment, explain how each component works, give you tips to fly with safety and also record videos.
You will quickly master a quadcopter contruction and understand how it works.
Then, I will teach you the basic controls, help you to fly your quadcopter, show you how to have fun with FPV systems (first person view) and I will also show you how to record HD quality videos with accessible cost equipment.
Just follow my instructions and practice with your quadcopter. Soon you will become a great pilot.
I will be around to assist you whenever you need or have any difficulty and we will also use the course forum to see your progress and exchange experiences.
You should take this course if you want to learn about drones and wish to have fun with this wonderful hobby.
What are the requirements?
A little bit of patience, curiosity and enthusiasm!
You will need to use common tools, a soldering iron, a workbench and a computer (PC or MAC) for the quadrotor configuration.
A list of components and needed parts will be provided in lecture 2.
What am I going to get from this course?
Over 47 lectures and 6.5 hours of content!
Choose the components and equipments needed to build a racing quadcopter.
Understand how each component works in a simple way.
Get the most out of the battery choosing its correct capacity for your multirotor.
Fly your racing quadcopter from basic moves to advance first person view (FPV) flight.
Record your flights in HD quality videos with a simple and affordable set.
Build any multirotor type or improve your racing quadcopter.
What is the target audience?
Everyone who is looking for a complete path to build a racing quadcopter from scratch in a quick and easy way should take this course. No previous knowledge is needed.
This course is for everyone interested to learn how to fly multirotors quickly and in a safe way. You will learn basic flight tips, security actions and will awake the TOP GUN within you with first person flight (FPV).
Everyone who wishes to start this amazing hobby with low cost and amazing results.
You should not take this course if you dont like to have fun and avoids to feel the adrenaline flowing in your veins!

Section 1: Introduction Lecture 1 What will you learn on this course? Preview 01:50 A quick preview of what you will get with the course. Section 2: Choosing the components, parts and equipments Lecture 2 Meeting the components Lets take a look on each part of our quadcopter! Lecture 3 It´s Time to go shopping This is the list of essentials and advanced (optional) materials for the drone construction. Section 3: The LIPO Battery Lecture 4 Understanding LIPO batteries You will need a power source for your drone do its time to learn about it! In this section you will learn to choose the battery fot your quadcopter. Lecture 5 Charging your LIPO Battery Understand the connections and cables from the battery and charger. Lecture 6 Using the charger 11:06 Learn how to charge your battery using the IMAX B6 charger. Section 4: The Radio Control Lecture 7 Taking a look at the Radio Transmitter Understand the basic radio transmitter functions. Lecture 8 Receiver binding 43 pages Your radio and receiver should come "binded" from factory. If your transmitter is not talking to your receiver yet or if you need to bind a secont receiver to your radio, follow the instructions on page 7 from the radio manual to learn how to "bind" the receiver to the radio transmitter. Follow the connection schema printed on the receiver to plug the batteries in the correct way. Section 5: Putting it all together Lecture 9 Engine thread clockwise/counter-clockwise 04:41 Now we will understand the engines thread differences and learn to choose the engine spinning direction. Lecture 10 Before you begin to assemble the quadcopter arms Lecture 11 Engine spinning test 11:35 The engine spinning direction in a simpler way and more explanations. Lecture 12 Assembly the engines and ESCs to the quadcopter arms - clockwise thread 09:23 Engines with clockwise thread. In this section I will show you how to assemble a complete quadcopter arm with the engine and ESC connected. You will test the spinning direction of the engine and make sure that it is spinning in the right direction. We will use the radio, receiver and batteries to test the engine spin. I will show you one build, but you have to do it two times. We need two arms with this configuration for the quadcopter. Lecture 13 Assembly the engines and ESCs to the quadcopter arms - counter-clockwise thread 15:26 Engines with counter-clockwise thread. In this section I will show you how to assemble a complete quadcopter arm with the engine and ESC connected. You will test the spinning direction of the engine and make sure that it is spinning in the right direction. We will use the radio, receiver and batteries to test the engine spin. I will show you one build, but you have to do it two times. We need two arms with this configuration for the quadcopter. Lecture 14 Frame assembly - Part I 03:26 Lets start to assemble the frame structure. Lecture 15 Frame assembly - Part II 08:20 Assembling the arms. Lecture 16 Connecting the wires to the battery - Part I 19:56 In this section we will start to build the power cable of all electronics on the quadcopter to the battery. This cable needs two wires: Positive (red) and Negative (black). This first part will show you how to build the positive (red) wire. Lecture 17 Connecting the wires to the battery - Part II 11:08 In this section we will continue to build the power cable of all electronics on the quadcopter to the battery. This second part will show you how to build the negative (black) wire. Lecture 18 The battery connector 06:25 Now you will connect the battery connector (XT60) and finish the wires connections. Lecture 19 Finishing the bottom of the quadcopter 11:24 Let´s close the bottom of the frame and keep the wires protected. Lecture 20 Installing the flight controller - Part I 14:16 Installing the flight controller on the frame. Lecture 21 Installing the flight controller - Part II 08:33 Connecting the ESCs to the flight controller. Lecture 22 How to install the receiver 08:24 In order to take control of your drone the flight controller must know what you want it to do. The receiver is the bridge between your commands and the flight controller. Let´s connect the receiver now! Section 6: Flight controller and radio setup Lecture 23 Choosing the channel 5 on the radio 03:45 Before going thru the the flight controller setup, let's choose the switch that will work as the 5th channel on the radio. This switch will be used to turn on acro or normal mode. Choose one of the radio switches that better fits for you. When turned off (0) the normal flight mode will be selected. When turned on (1) the acro (acrobatic) mode will be selected. In normal flight mode the quadcopter will self-level automatically when you release the roll or pitch controls. It's much easier to fly. In acro mode the quadcopter will not level itself automatically and you should level the quadcopter. It's harder to fly especially if you never did it before. Lecture 24 Downloading the OpenPilot GCS (Ground Control Station) Download and install the Openpilot Ground Control Statino. Lecture 25 Flight Controller and radio Configuration (first part) 16:44 This is the first part of the flight controller setup. Lecture 26 Flight Controller and radio Configuration (second part) 14:17 This is the second part of the flight controller setup. Section 7: Final steps Lecture 27 Installing the propellers 07:14 How to install the propellers on the quadcopter. Lecture 28 Fixing the receiver antenna 05:07 Choose where to fix the receiver antenna on the quadcopter frame. Lecture 29 Fixing the battery 04:10 How to hold the battery on the quadcopter frame. Lecture 30 Testing your quadcopter. 06:10 This is not a flight yet. Let´s see if everything is working fine and if the quadcopter is responding correctly. Be careful when holding the quadcopter in your hands when doing this exercise. Lecture 31 My first flight test. 07:00 Since the weather haven't helped me to test the quadcopter outside, I decided to test it at home... On the kitchen floor! Please test your quadrotor off home in a large area, especially if you've never flown before. Always think about safety! I included in this video some tips on how to take off from your quadcopter that might be useful. I know that I am not being an example in this video. Anyway, just do as I say and don't do as I do! Section 8: Security Lecture 32 Safety first Before flying around with your drone, keep in mind some security rules and common sence. There are also rules to be respected depending on the country you live. Section 9: Flight Simulators and other cheap drones for flying practicing Lecture 33 Not feeling confortable for your first flight? Don´t worry. Consider using Flight Simulators and low cost quadcopters for flying practice before put your master piece on the field. I use both, all the time! Let´s see some options. Section 10: The sky is the limit Lecture 34 Practicing with your quadcopter 08:02 Basic commands to practice and learn to fly your quadcopter. Section 11: Aerial videos Lecture 35 Adding the mobius camera to your quadcopter A low cost camera with amazing video quality! Lecture 36 Installing the camera support (part 1) 12:41 How to install the camera anti-vibration base and the camera holder on the frame. Lecture 37 installing the camera support (part 2) 08:34 How to install the camera anti-vibration base and the camera holder on the frame (part 2) Lecture 38 Installing the camera support (part 3) 08:34 How to install the camera anti-vibration base and the camera holder on the frame (part 3) Lecture 39 The mobius camera software 11:40 Download the camera software, setup the camera modes and firmware updates. Lecture 40 Using the camera to record your flights 06:35 How to record videos and change the camera modes. Section 12: First Person View systems Lecture 41 FPV systems - Awaken the TOP GUN within you! 13:19 Using a FPV system will give you another perspective of flying, putting you in the cockpit of his drone. Lots of fun ahead! Lecture 42 Connecting the mobius camera to the video transmitter (first part) 12:01 How to use the mobius camera with the FPV system. (first part) Lecture 43 Connecting the mobius camera to the video transmitter (second part) 17:41 How to use the mobius camera with the FPV system. (second part) Section 13: Final considerations Lecture 44 Final Message 02:21 Yep! It's the end of the course. I hope by now you already have in your hands a beautiful quadcopter, having fun with it! Lecture 45 Video samples Preview 03:42 These are some video samples taken with my quadcopter using the mobius camera. Hope you Enjoy! Lecture 46 What´s next? You already built your quadcopter and became a pilot. What else can be done from now? Section 14: Let´s Keep in touch! Lecture 47 Share your experiences Let me know how you are doing with your quadcopter. Share your photos, videos and keep in touch. I will be glad to receive your feedback and see your progress!

حجم فایل: 3.1GB

آیا این نوشته را دوست داشتید؟
Udemy Drones Step by step to build and fly a racing quadcopter

پیشنهاد آموزش مرتبط در فرادرس


جاوید 4 سال و 10 ماه قبل

به نام خدا
سلام
این آموزش ها تو سایته شون زیرنویس انگلیسی دارن لطفا اونا روهم قرار بدین

Salar 5 سال و 3 ماه قبل

با سلام
اگه بخوایم درخواست زیرنویس برای آموزش ها بدیم چه باید بکنیم آیا سایت مرجع و معتبری برای این منظور وجود دارد
یادگیری مسایل به زبان اصلی دشواره بعضی نکته ها رو باید واقعا فهمید که چه کاربردی دارند

مریم 5 سال و 3 ماه قبل

با سلام و عرض ادب
آیا این آموزش به زبان فارسی هست یا نه؟

مدیر 5 سال و 3 ماه قبل

آموزش به زبان انگلیسی است.